TERA CLN-50 Radio to Radio Cloning Cable
Quickly program handheld radios in the field with your pre-programmed handheld using this handy clone cable.
Works with TERA models TR-500, TR-505 & TR-590 handheld radios.
Out of stock
Quickly program handheld radios in the field with your pre-programmed handheld using this handy clone cable. Works with TR-590, TR-500 and TR-505 handhelds.
The CLN-50 allows you to clone all radio settings from one TERA TR-500/505/590 to another (of the same model).
Note: We’ve noticed a slight issue while using this cable. Depending on your source radio’s channel settings, after cloning, your source and slave radios may default to Channel Lock Mode On the first time you use it. If you simply turn off the channel lock feature with the appropriate side-button, the radio will return to normal “unlocked” operation. We have not tested it yet with a radio that does not have the Channel Lock Mode programmed on a side-button, so some experimentation may be required to obtain the desired cloning functionality otherwise.
Note: This programming cable is not compatible with Wouxun or Baofeng radios.
IMPORTANT: By using this cloning cable, you are solely responsible for operating your radios in compliance with FCC licensing and regulations. We are not responsible for any harm caused by the use or misuse of this device.
|Dimensions||4 × 3 × .5 in|
18 inches, including connectors
30 Day Manufacturer's Warranty