Quickly program handheld radios in the field with your pre-programmed handheld using this handy clone cable. Works with TR-590, TR-500 and TR-505 handhelds.
The CLN-50 allows you to clone all radio settings from one TERA TR-500/505/590 to another (of the same model).
Note: We’ve noticed a slight issue while using this cable. Depending on your source radio’s channel settings, after cloning, your source and slave radios may default to Channel Lock Mode On the first time you use it. If you simply turn off the channel lock feature with the appropriate side-button, the radio will return to normal “unlocked” operation. We have not tested it yet with a radio that does not have the Channel Lock Mode programmed on a side-button, so some experimentation may be required to obtain the desired cloning functionality otherwise.
Note: This programming cable is not compatible with Wouxun or Baofeng radios.
IMPORTANT: By using this cloning cable, you are solely responsible for operating your radios in compliance with FCC licensing and regulations. We are not responsible for any harm caused by the use or misuse of this device.
This antenna is a VHF/UHF Dual-band, wide coverage antenna which is ideal for MURS, GMRS, NOAA WX, Search & Rescue, Public Safety including, Fire, EMS, and Amateur HAM communications with a handy lift and fold over hinge antenna and NMO type mount. Manufacturer Part: COMET CA-2x4SR NMO Works with all TERA, Wouxun & AnyTone, and most other two-way radios & scanners. See description below for more details.
Standard capacity Li-ion rechargeable battery pack for TR-590, TR-500 & TR-505 handhelds. Voltage is 7.4V with 1600 mAh capacity offering over 20 hours of operation between recharges. This battery charges with the (CRG-50) desk top charger (not included).
Protect and keep your radio at the ready with this rugged, heavy duty nylon windowed radio case with stainless steel swivel belt clip. Fits the TERA TR-590, TR-505 & TR-500, and Wouxun KG-UV6X & KG-UV3X.
Next generation software by TERA makes programing your TERA TR-590 a snap! Kit includes CD Software disk and enhanced USB cable that makes programming your radio easier than ever. Works with Windows 10, 8.1, 8, and 7, or with Parallels on a Mac. No more complicated USB driver setup! The TERA TR-590 requires programming to first unlock the radio before any front panel programming use. Questions? Contact us and we'll be happy to help!